C8 Corvette Cooling Air Deflectors
As Seen On:
HorsePower Obsessed: https://www.youtube.com/watch?v=laT-INwVcbY
Brandon's Garage: https://www.youtube.com/watch?v=N2y_j8qWpZU
For C8 Owners Who Push Their Cars Beyond Everyday Driving
DynamicDucts™ Track Edition is built for the drivers who run higher heat loads - supercharged/Turbo'd/tuned setups, aggressive exhaust systems, or full track days where temperatures climb far beyond normal street use.
The Street Edition remains the perfect choice for everyday driving, spirited weekend runs, and OEM or lightly-modified C8s. The Track Edition exists for a percentage of owners who demand more.
Using the same proven geometry, fitment, warranty, and engineering as the Street Edition, the Track Edition upgrades only one thing: the material - to a significantly stronger, higher-temperature composite designed for extreme environments.
If you push your C8 harder than most, this is the duct for you.
🔧 Track Edition Key Advantages
✔ Upgraded High-Temperature Composite
Engineered from a next-generation carbon-infused PAHT-CF material that offers 2–3× higher tensile strength and 2-3× the heat capability of the Street Edition’s PETG-CF. Built for continuous exposure to extreme thermal cycling from high-output engines and track sessions.
✔ Same Engineering - Higher Heat Ceiling
Identical airflow, geometry, fitment, and installation as the Street Edition, but with a composite tuned for long-duration high-temp environments.
✔ Ideal for Modified or Track-Driven C8s
Perfect for owners running:
-
Track days
-
Long summer highway pulls
-
Aftermarket headers, cats, and exhaust
-
Superchargers, Turbos, tunes or high-output builds
-
Higher sustained engine-bay temperatures
✔ OEM Replacement/Enhancement
Direct upgrade for GM OEM Part Numbers 85580654 & 85580653, maintaining OEM fit and compatibility across all 2020+ C8 models.
✔ Reinforced Scoop-Style Airflow
Channels high-volume ambient air into the engine bay to reduce heat soak during extended load, while maintaining the same aerodynamic behavior as OEM.
✔ Bolt-On Install (Same as Street Edition)
No drilling, no cutting - installs in under 15 minutes with existing skid plate hardware.
🆚 Street Edition vs. Track Edition
| Feature |
Street Edition |
Track Edition |
| Ideal Use |
Daily drivers, spirited cruising, OEM or lightly-modified cars |
Track days, tuned/high-output builds, extreme heat environments |
| Material |
High-strength PETG (perfect for everyday heat loads) |
Advanced high-temp carbon composite PA12-CF ( Carbon-Fiber-Reinforced Polyamide 12 (Nylon 12), designed for sustained high-heat) |
| Tensile Strength |
Excellent |
2–3× Higher |
| Heat Capability |
-4 > 167°F |
-40 > 266°F |
| Price |
More accessible |
Higher due to advanced materials, special equipment / longer manufacturing time |
🔥 Proven Cooling Performance:
Real-world testing on a 2024 Corvette Z06 shows temperature reductions up to ~56°F across critical engine bay components:
Temperature reductions shown were recorded on a single stock 2024 Corvette Z06 after aggressive driving. Individual results will vary significantly based on ambient temperature, driving style, vehicle modifications, etc.
✔ Intake Covers: Dramatic ~56°F drop (from 154°F to 98°F)
✔ Engine Bay Walls: Up to ~50°F cooler (e.g., 132°F down to 87°F).
✔ Trunk & Surrounds: ~42°F cooler (146°F to 104°F)
✔ Headers & Exhaust: ~36°F reduction (222°F to 186°F)
Results will vary based on ambient temps, driving style, modifications, and vehicle condition.
Installation Link
📦 In the box:
~ 2x C8 Track Edition DynamicDucts™
~ 1x QR code for instructions & direct support
*NOTE: 100% C8 Fitment Guarantee! DynamicDucts™ are engineered for OEM-style installation and tested extensively. As with any aftermarket product, installation and use are at the owner’s discretion. DynamicCaps™ is not liable for damage resulting from improper installation or use.
6-Month Limited Warranty - DynamicDucts™
DynamicDucts™ are backed by a 6-month limited warranty from the date of purchase, covering defects in materials and workmanship under normal use. This warranty reflects our commitment to product quality while ensuring proper and safe installation practices.
What Is Covered
- Manufacturing Defects – Material or production issues that prevent the product from functioning as intended.
- Structural Failures – Breakage or deformation that occurs under normal, intended use.
What Is Not Covered
- Vehicle-Related Issues – Any impact to the vehicle’s warranty, performance, airflow behavior, temperatures, sensors, or mechanical systems. DynamicDucts™ are an aftermarket accessory and do not modify, tune, or alter engine performance; therefore, we assume no liability for any vehicle-specific outcomes.
- Improper Installation – Damage or issues caused by incorrect mounting, failure to follow provided instructions, or installation by an unqualified individual.
- Misuse, Abuse, or Accidents – Including road hazards, impacts, debris strikes, or track use beyond intended capabilities.
- Modifications or Alterations – Any adjustments, trimming, drilling, or changes made by the user.
- Normal Wear and Tear – Including cosmetic blemishes, surface texture variations from 3D printing, or discoloration over time.
Warranty Claim Process
To submit a claim:
- Proof of Purchase – A valid receipt or order confirmation is required.
- Photos & Description – Provide clear images and a detailed explanation of the issue.
- Submit Your Claim – Email our team at support@dynamiccaps.com.
DynamicCaps™ may request the product be returned for inspection before determining coverage.
Shipping for Warranty Claims
- Customers are responsible for the cost of shipping the item to DynamicCaps™ for evaluation.
- If the claim is approved, DynamicCaps™ will cover the shipping cost of the repaired or replacement item returned to the customer.
Resolution Options
If a claim is approved, DynamicCaps™ may, at its sole discretion:
- Repair the product,
- Replace it with the same or an equivalent model, or
- Issue a refund if neither option is available.
Limitations of Liability
DynamicCaps™ is not liable for:
- Any engine performance changes, thermal variations, airflow effects, or mechanical issues.
- Any impact to OEM warranties, dealership service decisions, or manufacturer assessments.
- Any incidental, indirect, or consequential damages related to the installation or use of DynamicDucts™.
DynamicDucts™ are aftermarket accessories installed at the owner’s discretion and risk. This warranty applies only to the original purchaser and is non-transferable.
